LZ-N/1200 Straight Line Drawing Machine
Straight Line Drawing Machine
1.Type :LZ-n/1200
| Items |
Technical Parameters |
| NO.of Drafts |
~9 |
| Design Speed |
10m/s |
| Max.Inlet Wire Diameter |
Ф16mm |
| Inlet Wire Length |
≤1250MPa |
| Min.Outlet Wire Diameter |
Ф3mm |
| Average Pass Reduction |
20% |
| Drum Diameter |
Ф1200mm |
| Drum Surface Treatment |
Overall Surface Hardening |
| Drum Surface Hardness |
≥HRC55 |
| Drum Cooling Mode |
Water Cooling & Air Cooling |
| Motor Power |
90~132KW |
| Drive Mode |
Speed Regulator of Hardened Tooth Surface |
| Speed Control |
AC Frequency Converting |
| Motor Control |
PLC Control |
| Take-up Spool Size |
1120/1250 |
2. Technical parameters
2.1. Drawing Block diameter and number of blocks: φ1200mm ,9 blocks.
2.2. Inlet wire diameter: φ14-φ9, outlet diameter:φ9-φ3.
2.3. Max compression ratio 21%, Min.15％.
2.4. Designed speed 8m/s, working speed 5-7m/s;Pay-off speed ~ 2 m/s.
|
Wire dia.
(mm)
|
Total
ted.
|
Quantity
of dies
|
Aver.red. |
Material
(%C)
|
Outlet
Speed
(m/s)
|
Eff. |
Actual
production
|
Double
times
|
| input |
output |
kg/hour |
t/year |
t/year |
| 8 |
3.18 |
84.2% |
9 |
18.54% |
0.82 |
7 |
75% |
1178 |
8480 |
16960 |
| 11 |
4.25 |
85.1% |
19.05% |
7 |
2104 |
15146 |
30293 |
| 12 |
4.25 |
87.5% |
20.60% |
7 |
2104 |
15146 |
30293 |
| 12.5 |
5.05 |
83.7% |
18.24% |
6 |
2546 |
18330 |
36661 |
| 12.5 |
5.05 |
83.7% |
18.24% |
6 |
2546 |
18330 |
36661 |
2.5. Inlet wire strength: less than 1250MPa Outlet wire strength 1960 MPa
2.6. Cooling type:
Drawing Block cooling: using forced circulation water and independent air cooling, with water flow display; water flow sensor, this sensor switches off the drawing machine when the water pressure and water flow drops;Drawing Block temperature: max 30°C
Die box cooling: close-type water cooling, with water flow display
2.7. Start & normal stop time: 5-30s; emergency stop: 3s
2.8. Equiped with synchronizing pay-off and take-up machine ;
2.9. Spool size (in take-up spooler):
Ø 500(barrel) X 964(overall width) X Ø 1250(flange), inner dia. Ø120, spool weight: 3500 kg
2.10. Each group drawing machine can be jog running or link running;
2.11. With corrector, and meter counter; counter accuracy 0.1％
3. Main parts
3.1. Pay-off stand:
3.2 Wire drawing unit
3.3 Drawing machine rack
3.4 Reducer gear box
3.5 Drawing block
3.6 Cooling fan
3.7. Dies box
3.8 Straightener
3.9 Take-up machine
4. Detection and calculation
1)The drawing speed of each roller can be defected and displayed, the line speed is displayed in digital;
2)The length of the finished drawing wire can be measured and displayed, the expected wire length and the pre-warning can be set in advance to achieve early warning and stop control at the expected value.
3)The voltmeter is installed on the electric control cabinet, every ammeter and other measuring instruments are installed on the main control cabinet
4)Work time of the device can be measured and calculated , the records be installed in the control cabinet door.
Product Tags:
|
|
PLC Control Straight Line Drawing Machine LZ-N/1200 Images
|
